rvbox/docs/testing-vm.md

Provisioned Windows test VM

This page is the authoritative record for the resettable Windows smoke fixture. It describes the machine that is available today; it is not the complete Windows release matrix. Keep the values here in sync with the VM before adding or changing native test automation.

Last configuration check: 2026-09-09 UTC. The VM was observed powered off with baseline-clean-administrator selected. The native harness targets that snapshot; the fixture is ready for native runs. A test run must still perform its own identity, snapshot, readiness, and exclusive-lease checks rather than relying on that observation.

Identity and access

Item	Value
Test VM	rvbox-win10-test
VM UUID	6cdc114f-71e5-4167-a394-e922e14e6f5c
VM group	/RVBox/Tests
VirtualBox host	SSH alias helium-remote; host address 192.168.50.162; host user cabbage
Host platform	Arch Linux; kernel 7.2.2-arch1-1; VirtualBox 7.2.16r174877
VM configuration	/home/cabbage/VirtualBox VMs/RVBox/Tests/rvbox-win10-test/rvbox-win10-test.vbox
VM logs	/home/cabbage/VirtualBox VMs/RVBox/Tests/rvbox-win10-test/Logs
Snapshot folder	/home/cabbage/VirtualBox VMs/RVBox/Tests/rvbox-win10-test/Snapshots
Guest OS	Windows 10 Pro 22H2, build 19045.2006, en-US, BIOS boot
Guest account	Local rvboxtest; split-token local administrator; console session 1 was observed during provisioning
Guest Additions	7.2.16r174877; readiness requires published Guest Additions version and Windows OS-release properties (this build does not publish a RunLevel property)
Last observed state	poweroff; current snapshot baseline-clean-administrator, the reset target for native runs

The two fixture accounts deliberately share one fixed test-only password for reproducible native runs. The value is provisioned only in the Helium host's mode-600 file and is never committed; agents use the documented file contract rather than re-entering or varying it. These credentials are valid only for this isolated disposable VM and must never be reused outside it. The controller reads the same value for both accounts from:

/home/cabbage/.local/share/rvbox-secrets/rvbox-win10-test.password

The file must be mode 0600 and is supplied to VirtualBox only with --passwordfile; the controller never places it on a command line, run manifest, log, or artifact. The SSH key and the Helium host account credential remain private and are not part of this test-only credential exception.

Hardware and device profile

Item	Value
Memory / CPUs	4096 MiB RAM; 2 vCPUs; 100% execution cap; host CPU profile
Display	VBoxSVGA; 64 MiB VRAM; 3D acceleration disabled
Firmware / boot	BIOS; disk first, DVD second; install media is detached after provisioning
System disk	40 GiB dynamically allocated VDI; logical base path /home/cabbage/VMs/rvbox-win10-test.vdi; active snapshot differencing disks live under the snapshot folder above
Install media	/media/Data2/Downloaded/Win10_22H2_English_x64.iso, Windows image index 6
Audio	Virtual audio disabled (audio=none, playback and capture off)
USB	OHCI, EHCI, and xHCI disabled; no USB filters
Clipboard / drag and drop	Disabled, including clipboard file transfers
Network adapter	One Intel 82540EM adapter, cable connected, NAT attachment; MAC 080027036E7C
Shared folders	None; there is no shared-folder contract for tests

This is a minimum smoke profile (2 vCPU/4 GiB), not the recommended release host profile. It is suitable for bounded tests and may be too small for long parallel suites.

Network and remote-control endpoints

The guest address is assigned by VirtualBox NAT/DHCP. 10.0.2.15 was the last observed guest IPv4 address, but it is not a stable identity and must not be hard-coded into a harness.

Endpoint	Configuration and use
Host management	SSH to helium-remote, then invoke VBoxManage; do not assume VBoxManage is installed on the Linux controller
Guest management	VirtualBox Guest Control over the host; use explicit executable/argument vectors and the password file above
VRDE (VirtualBox RDP)	Enabled for diagnostics on Helium loopback at 127.0.0.1:3389; external authentication, VBoxAuthSimple user rvboxtest, Security/Method=negotiate, single connection reuse, multiconnection off. Reach it only through an explicitly temporary, private SSH forward.
VRDE TLS material	Auto-generated certificate and private key under /home/cabbage/VirtualBox VMs/RVBox/Tests/rvbox-win10-test/; keep both on Helium and do not copy them into the repository or test artifacts
VRDE channels	Input/display enabled; audio, upstream audio, USB, clipboard, and RDP device redirection disabled; no video channel
Native Windows RDP forward	NAT rule rvbox-rdp: host 192.168.50.162:3390 to guest port 3389
Native Windows RDP state	Disabled in the baseline (TermService stopped and fDenyTSConnections=1); do not treat port 3390 as usable until a test explicitly enables and later restores it

VRDE is not the supported test-control channel. It is retained for bounded diagnostic probes only: some RDP clients negotiate input capabilities that VirtualBox 7.2.16 does not handle reliably, and earlier probes included headless-server crashes. Use Guest Control for deterministic setup, execution, and collection. Do not expose the VM's RDP endpoints beyond the test LAN.

Snapshots and reset contract

Three clean snapshots exist and must be retained. baseline-clean-administrator is the only reset target: it contains no RVBoxClient SCM service, RVBox tray Run-key registration, RVBox state, logs, or staged binaries; it also has the fixture-only built-in Administrator account enabled for high-token Guest Control installation.

Snapshot	UUID	Description
baseline-clean	5e79176a-3e56-4c5d-bb61-a405a6dcdd59	baseline-windows10-pro-22h2-rvboxtest-guest-additions
baseline-disk-first	9430a9a4-754a-4b22-beaa-8dfd90043f5b	baseline-windows10-pro-22h2-disk-first; retained diagnostic snapshot
baseline-clean-administrator	ba5ce5f1-77e3-44b0-8d91-534becce27ff	baseline-windows10-pro-22h2-administrator-enabled-full-token; current reset target

Restore only while the VM is powered off. Every destructive or potentially stateful run must:

1. Acquire the run lease and verify the VM name, UUID, and snapshot UUID.
2. Restore baseline-clean-administrator if the current state is not the baseline.
3. Start headless and wait for VMState=running plus Guest Additions readiness.
4. Run the bounded test, collect redacted artifacts, and close every Guest Control process that was opened by the run.
5. Request a graceful guest shutdown and wait for VMState=poweroff.
6. Restore baseline-clean-administrator again and leave the VM powered off.

Use controlvm ... poweroff only for a hung, disposable test; it can lose guest state. Never delete any clean snapshot, unregister the VM, or alter the stale unregistered win10_dev configuration (its disk is missing).

Harness contract

The canonical adapter is the POSIX controller script scripts/windows/test-host. It runs from the Linux controller and invokes VBoxManage only through SSH on Helium; the fixture host is Arch Linux and does not provide PowerShell. Its actions are status, prepare, stage, install, run, collect, stop, reset, and recover. The legacy test-host.ps1 is retained only as a reference for a future Windows-hosted fixture and is not the Helium lane.

The adapter takes identity and credentials only from its environment:

export RVBOX_TEST_VBOX_HOST=helium-remote
export RVBOX_TEST_VBOX_VM=rvbox-win10-test
export RVBOX_TEST_VBOX_VM_UUID=6cdc114f-71e5-4167-a394-e922e14e6f5c
export RVBOX_TEST_VBOX_SNAPSHOT=baseline-clean-administrator
export RVBOX_TEST_VBOX_SNAPSHOT_UUID=ba5ce5f1-77e3-44b0-8d91-534becce27ff
export RVBOX_TEST_GUEST_USER=rvboxtest
export RVBOX_TEST_GUEST_PASSWORD_FILE=/home/cabbage/.local/share/rvbox-secrets/rvbox-win10-test.password
# Defaults to Administrator and the same password file; overrides are optional.
export RVBOX_TEST_PROVISIONER_USER=Administrator
export RVBOX_TEST_PROVISIONER_PASSWORD_FILE=/home/cabbage/.local/share/rvbox-secrets/rvbox-win10-test.password

Those values are the controller defaults for this one documented fixture, so a normal Helium run does not need to export them. They remain overrideable for a separately recorded fixture. The default contains only the host-local password file path, never the password value.

The provisioned lane's backend is SSH plus VBoxManage plus Guest Control; it does not require WinRM, OpenSSH inside Windows, or a stable guest IP. The adapter first validates the VM and snapshot UUIDs, acquires its exclusive lease on Helium, and writes a non-secret step report to the run directory. Guest commands use exact console-safe executable paths and argument vectors. With this VirtualBox build, --wait-stdout and --wait-stderr are supported but --wait-exit is not; use closeprocess when a process wait cannot complete. For cmd.exe payloads, include --unquoted-args so Windows backslashes and the single /c payload are preserved.

stage accepts one versioned non-secret test bundle and copies it first to an exact host staging directory, then to C:\\ProgramData\\RVBox\\test-runs\\<run-id>. install performs the one purposeful direct Guest Control launch of the staged GUI-subsystem executable, using only the fixture provisioner's high token; because this VirtualBox build cannot reliably report that process's exit, SCM RUNNING is the completion proof. After installation, run uses sc.exe and other console-safe management tools to reconfigure/start/query/stop the installed RVBox service, then checks the service's real health endpoint, named-pipe response, durable state, and agent-server results. Before a WSS scenario it performs a bounded guest-to-nginx connectivity and CA-trust probe. The resulting service and artifact paths are recorded in the run report and reclaimed by the snapshot reset rather than broad guest deletion.

Clean baseline and non-interactive installation

rvboxtest deliberately remains a split-token administrator. Guest Control therefore launches it at medium integrity and it must never be used to create or modify machine-wide SCM state. The reset snapshot has no RVBox installation.

To automate the real install path, use the Windows built-in Administrator account as a separate fixture-only provisioning identity. It is enabled only on this disposable VM, has its documented fixed test password, and keeps FilterAdministratorToken=0 (the normal Windows 10 default), and verify that Guest Control gives it a High Mandatory Level. This is the per-account exception that preserves UAC for rvboxtest; do not globally disable Admin Approval Mode or change rvboxtest into an always-elevated user. The normal harness defaults to this identity and same password file:

export RVBOX_TEST_PROVISIONER_USER=Administrator
export RVBOX_TEST_PROVISIONER_PASSWORD_FILE=/home/cabbage/.local/share/rvbox-secrets/rvbox-win10-test.password

If a policy or hardening configuration makes this account medium-integrity, the harness fails closed; do not replace it with a UAC-bypass mechanism. The host file remains mode 0600 and the value is not recorded in run reports or artifacts. test-host install first verifies that the reset guest has no RVBoxClient, checks the provisioner's High Mandatory Level, invokes the actual staged rvbox.exe --install-service --config ..., and polls SCM for RUNNING. It then checks that the provisioning account is no longer present in query user. A lingering Administrator session could become a second WTS candidate and contaminate ACTIVE_USER / ACTIVE_USER_ELEVATED tests, so the harness fails before command dispatch and the run must reset. run may then exercise reconfigure/start/restart paths. Snapshot reset removes the installed service and all RVBox data again.

The provisioner is fixture administration only: it is not shipped with RVBox, not a product service/broker, not a Task Scheduler dependency, and never participates in command-context selection. The separately interactive UAC prompt route remains a small manual test because an invisible Guest Control session cannot safely approve a consent prompt.

Scope and known limitations

This fixture currently provides one active console user and no standard-user, ambiguous multi-session, Server Core, older-build, or physical hardware variant. Those release-matrix entries remain deferred; their selector and fallback unit tests are still required. The GUI-subsystem Guest Control probe also exposed a completion-path limitation for rvbox.exe; native runtime coverage must use a service-driven/console-compatible runner until that adapter path is completed. Wine and protocol stubs do not count as Windows coverage.

For a complete command sequence and lifecycle examples, see the provisioned lane section in implementation-plan.v1.md and the general testing workflow.